NEC Univerge NEAX 2000 IPS Command Manual page 812

COMMAND CODE TITLE:
D000
DATA
70 SMDR service for incoming call
71 Add the first fixed digit to the last 4 digits of 5-digit station num-
ber on SMDR output
72 Authorization Code is printed out
76 Send detail information for tandem calls to SMDR for Central-
ized Billing-CCIS
77 Send detail information of Tandem calls to SMDR which is set to
"4" by CMD001>80/100/120/140
78 Send detail information of Tandem calls to SMDR which is set to
"5" by CMD001>80/100/120/140
79 Contents of Tandem call information to be sent out to CCIS or
SMDR Terminal
87 Send Check Out complete message to PMS when PBX receives
Check Out message from PMS
88 Send message to PMS, if a checked out station is originating a
C.O. call.
SMDR/CIS/PMS FUNCTIONS (1)
1ST DATA
FUNCTION
See CMD000>252,
0 : Effective only for incoming calls
1 : Effective for all incoming calls
0 : Not add
1 : To add
CMD001>189
0 : NO
1 : YES
0 : Not sent
1 : To send
0 : Not sent
1 : To send
0 : Not sent
1 : To send
0 : Only outgoing call information
1 : Both outgoing and incoming call
0 : Not sent
1 : To send
0 : Not sent
1 : To send
– 788 –
: Initial Data
2ND DATA
with Account Code entered
information
Continued on next page
NWA-008844-001 Rev.5.0
CMD000
91ch3009.fm