NEC Univerge NEAX 2000 IPS Command Manual page 813

COMMAND CODE TITLE:
D000
1ST DATA: 100-176
DATA
100 In printout of totaled bill/call record, a new page starts on each
NOTE 1 Small Group.
101 In printout of totaled bill/call record, a new page starts on each
NOTE 1 Medium Group.
102 In printout of totaled bill/call record, a new page starts on each
NOTE 1 Large Group.
103 Printer Line Feed Code (Depends on the printer provided)
114 Send Controlled Restriction message to PMS when setting Do
Not Disturb
115 Send Controlled Restriction message to PMS when setting Room
Cutoff
116 Send Message Waiting message to PMS when setting Message
Waiting
119 Send Maid Status message to PMS when setting Maid Status by
guest room telephone or Front Desk Terminal
121 Confirmation of the call records which have been printed out by
the Interim Printout on station basis
122 Confirmation of the call records which have been printed out by
the Interim Printout on group basis
NOTE 1: 1st data 100-102 are not effective for the group number 777 and 888 (Printout of all groups).
NOTE 2:
When using print paper with fold line, assign 2nd data to "1" if required.
NOTE 3: Effective when CMD016>XX05=1.
SMDR/CIS/PMS FUNCTIONS (1)
1ST DATA
FUNCTION
0 : NO
1 : YES
NOTE 2
0 : NO
1 : YES
NOTE 2
0 : NO
1 : YES
NOTE 2
0 : CR
1 : CR and LF
0 : Not sent
1 : To send
NOTE 3
0 : Not sent
1 : To send
NOTE 3
0 : Not sent
1 : To send
NOTE 3
0 : To send
1 : Not sent
0 : Not available
1 : Available
0 : Not available
1 : Available
– 789 –
CMD000
: Initial Data
2ND DATA
Continued on next page
NWA-008844-001 Rev.5.0
91ch3009.fm
JULY/01/2006