NEC Univerge NEAX 2000 IPS Command Manual page 324

COMMAND CODE TITLE:
20
SETTING DATA
DATA
A146 Message Waiting/Message Reminder Search
A147 Message Waiting/Message Reminder Retrieve
A148 Message Reminder Set
A149 Message Reminder Cancel
A150 Speed Calling-System (System Speed Dialing)
Origination
A151 Speed Calling-System (System Speed Dialing)
Origination
A152 Speed Calling-System (System Speed Dialing)
Origination
A154 Return Message Schedule Set
A155 Day/Night Mode change, Attendant Lockout
from ATTCON
A156 Attendant Programming for Remote Access to
System (DISA), Speed Calling-System (System
Speed Dialing), Date/Time Change and Tone
Ringer Change from ATTCON/DESKCON
A157 FLF Authorization Code Recognition
[Series 3300]
A158 Sending of Hooking Signal to C.O. line/Centrex
from PB telephone
A159 6-Party Conference Trunk Access
A160 10-Party Conference Trunk Access
A161 6/10-Party Conference Trunk Control
(To set up a conference)
A162 6/10-Party Conference Trunk Control
(To release designated party from a conference)
A163 Voice Call/Ring Tone Programming
A164 All Zone Internal Paging
NUMBERING PLAN/SINGLE DIGIT FEATURE ACCESS CODE
(PROGRAMMABLE)
MEANING
REMARKS
For 1000 memories
(1000-Slot Memory Block No. 3)
For 1000 memories
(1000-Slot Memory Block No. 1)
For 1000 memories
(1000-Slot Memory Block No. 0)
Cancel Code: Set data A023.
For ATTCON without MODE key
For ATTCON/DESKCON without
PROG key
term
For D
For calling
– 300 –
CM20
RELATED
COMMAND
CM15
Y=47, 48
CM13>03
CM90
CM08>110: 0
CM74
CM08>111: 0
CM74
CM08>112: 0
CM74
CM15 Y=19
CM90
CM10/CM14
CM08>158
Continued on next page
NWA-008844-001 Rev.5.0
91ch3003.fm
NOVEMBER/15/2006