NEC Univerge NEAX 2000 IPS Command Manual page 890

COMMAND CODE TITLE:
DD01
DATA
13 Room Status Code set by Check Out operation
[Series 3900]
14 Room Status Code when pressing Call Recording Function
Button
[Series 3900]
15 Call charge printout when Room Status Code matches the Room
Status Code for Check Out set by DD01>13
[Series 3900]
AP00 RS port assignment for SMDR/MCI/printer for PMS
100 Port 0
101 Port 1
102 Port 2
103 Port 3
NOTE 1:
When CMDD01>100-103: 3/10 is assigned, the initial data is set to specified port as the interface
condition. For interface conditions, refer to CMDD10 PRECAUTION.
NOTE 2:
When using the RS port for SMDR, two ports of port 0 to 3 can be assigned.
When two ports are assigned for SMDR, any one of two port should be assigned to SMDR termi-
nal 1 by CMDD10>X00.
NOTE 3: When using the RS port for MCI, one port of port 0 to 3 can be assigned.
NOTE 4: When using the RS port for PMS, port 1and port 3 are available.
NOTE 5: When setting the second data to 12, the initial data of CMDD10>X00, X01, X02, X03, X04, X05
is set automatically.
SMDR/MCI/PRINTER FOR PMS FUNCTIONS
1ST DATA
FUNCTION
0 : Not used
1 :
8 :
0 : Not used
1 :
8 :
0 : Not available
1 : Interim Printout per station
2 : Audit Printout per station
0
3
10 : MCI
12 : External printer for PMS
AP00 INITIAL
– 866 –
: Initial Data
2ND DATA
Room Status Code
Room Status Code
: No data
: SMDR with NEAX 2400 IMS
Format
See CMDD10
Continued on next page
NWA-008844-001 Rev.5.0
CMDD01
91ch3009.fm
JUNE/01/2007