NEC Univerge NEAX 2000 IPS Command Manual page 115

COMMAND CODE TITLE:
08
BASIC SERVICE FEATURE
046 Warning Tone sent to connected parties to alert Executive Right
of Way, Busy Verification or Attendant Override
• Three burst tone
• One burst tone
048 Passing Dial Tone facility
050 If the * button on a DTMF telephone is pressed while hearing
busy tone, it is regarded as a Switch Hook Flash
051 If the # button on a DTMF telephone is pressed while hearing
busy tone, it is regarded as a Switch Hook Flash
055 Result of a Switch Hook Flash on a telephone which belongs to
House Phone Group 0 or 1
056 Result of a Switch Hook Flash on a telephone which belongs to
House Phone Group 2 or 3
057 Result of a Switch Hook Flash on a telephone assigned as a Hot
Line
062 Call transfer from a station before a called station answers
063 Call transfer from a station before a called attendant answers
064 Reverted Call Metering
[Australia Only]
067 Automatic Change of Night Service (Attendant Overflow)
068 Camp-On Tone sending to a busy station by Camp-On
069 When a station user has dialed any one digit while hearing busy
tone
070 Line Fault Detection (Line disconnection or short circuit)
[Australia Only]
BASIC SERVICE FEATURES
[Other than New Zealand]
[New Zealand Only]
0 Not sent
1 To send
0 Not available
1 Available
0 Effective
1 Ineffective
0 Effective
1 Ineffective
0 Special Dial Tone
(Dialing is available)
1 Attendant Recall
0 Special Dial Tone
(Dialing is available)
1 Attendant Recall
0 Special Dial Tone
(Dialing is available)
1 Attendant Recall
0 Not available
1 Available
0 Available
1 Not available
0 Available
1 Not available
0 Available
1 Not available
0 Send out only once
1 Repeat at 4 seconds intervals
0 Switch Hook Flash
1 Step Call
0 To provide
1 Not provided
– 91 –
: Initial Data
SETTING DATA
See CM30 Y=03
Continued on next page
NWA-008844-001 Rev.5.0
91ch3001.fm
JULY/01/2006
CM08