Suzuki WagonR+ RB310 Service Manual page 2079

1A-10 HEATER AND VENTILATION
AIR INLET BOX
REMOVAL AND INSTALLATION
Refer to "COOLING UNIT" in "AIR CONDITIONING" section.
VENTILATION LOUVER
REMOVAL AND INSTALLATION
Remove ventilation louver (1) as shown in figure, and reverse re-
moval sequence to install ventilation louver.
2. Rag
1. Cooling unit packing
2. Dash packing
3. Packing
4. Drain hose
5. Blank
6. Door link
7. Air inlet door
8. Evaporator case
9. Air resistance board