The Drive And Programming Modes; The Drive And Programming Modes - YASKAWA V1000 Technical Manual

4.3 The Drive and Programming Modes

4.3

The Drive and Programming Modes

The drive functions are divided into two main groups accessible via the Digital LED Operator:
Drive Mode: The Drive mode allows motor operation and parameter monitoring. Parameter settings cannot be changed
when accessing functions in the Drive Mode
Programming Mode: The Programming Mode allows access to setup/adjust, verify parameters and Auto-Tuning. The
drive prohibits changes in motor operation such as start/stop when the Digital LED Operator is accessing a function in the
Programming Mode.
Table 4.3 illustrates the different functions visible as the "Up arrow" is scrolled immediately after powering up the drive.
Note: When b1-08 (Run Command Selection while in Programming Mode) is set to 1 (enabled), the drive can run even if the mode is switched
to the programming mode. When setting b1-08 to 0 (disabled), the mode cannot be switched to the programming mode while the drive
is running.
Mode Group
Drive Mode Functions
(Motor operation and monitoring)
Programming Mode Functions
(Changing parameters)
<1> The enlarged illustration of the LED indicates that the LED is on.
82
(Table 4.3)
Table 4.3 Summary of Modes
Description
Frequency Reference Display (Initial
power-up state)
Forward/Reverse
Output Frequency Display
Output Current Display
Output Voltage Reference
Monitor Display
Verify Function
Setup Group Parameters
All Parameters
Auto-Tuning
YASKAWA ELECTRIC SIEP C710606 16C YASKAWA AC Drive – V1000 Technical Manual
Key Press
LED Digital Operator Display
<1>
STOP
STOP
STOP
STOP
STOP
STOP
STOP
STOP
STOP
STOP