The Drive And Programming Modes; Summary Ofmodes; Start-Up Flowcharts - YASKAWA V1000 Series Installation & Start-Up Manual

4.3

The Drive and Programming Modes

The drive functions are divided into two main groups accessible via the Digital LED
Operator:
Drive Mode: The Drive mode allows motor operation and parameter monitoring. Parameter
settings cannot be changed when accessing functions in the Drive Mode
Programming Mode: The Programming Mode allows access to setup/adjust, verify
parameters and Auto-Tuning. The drive prohibits changes in motor operation such as start/
stop when the Digital LED Operator is accessing a function in the Programming Mode.
Table 4.2 illustrates the different functions visible as the "Up arrow" is scrolled immediately
after powering up the drive.
Note: When b1-08 (Run Command Selection while in Programming Mode) is set to 1 (enabled), the
drive can run even if the mode is switched to the programming mode. When setting b1-08 to 0
(disabled), the mode cannot be switched to the programming mode while the drive is running.
Mode Group
Drive Mode Functions (Motor
operation
and monitoring)
Programming Mode
Functions
(Changing parameters)
YASKAWA ELECTRIC TOEP C710606 09B YASKAWA AC Drive V1000 Installation & Start-Up Manual
4.3 The Drive and Programming Modes
Table 4.3 Summary ofModes
Description
Frequency Reference Display
(Initial power-up state)
Forward/Reverse
Output Frequency Display
Output Current Display
Output Voltage Reference
Monitor Display
Verify Function
Setup Group Parameters
All Parameters
Auto-Tuning
(Table
Key Press LED Digital Operator Display
4.2).
4
97