YASKAWA V1000 Technical Manual page 306

8.2 Drive Options and Peripheral Devices
Option
Frequency Reference Setting
—
Potentiometer (2 kΩ)
Frequency Reference
—
Potentiometer Knob
— Meter Plate
— Remote LCD Operator
— USB/Copy Unit
— PC Serial Cable
— External Operator Cable
Heatsink External Mounting
—
Attachment
— DIN Rail Attachment
—
NEMA Type 1 Kit
24 Vdc Control Power Supply
24 V
Option
Power Supply
— Drive Wizard Plus
— DriveWorksEZ
PROFIBUS-DP
—
Communications Option
CC-Link Communications
—
Option
DeviceNet Communications
—
Option
CANopen Communications
—
Option
EtherNet/IP Communications
—
Option
MECHATROLINK-II
—
Communications Option
MECHATROLINK-III
—
Communications Option
CompoNet Communications
—
Option
EtherCAT Communications
—
Option
PROFINET Communications
—
Option
Modbus TCP/IP
—
Communications Option
LonWorks Communications
—
Option
— POWERLINK
<1> Available for drive models BA0001 to BA0018, 2A0001 to 2A0020, and 4A0001 to 4A0011.
<2> Under development
306
Model Number
RV30YN20S2kΩ
CM-3S
NPJT41561-1
JVOP-180
JVOP-181
WV103
WV001 / WV003
Mechanical Options
EZZ020568o
EZZ08122o
<1>
EZZ020564o
PS-V10o
Communication Options
SI-P3/V
SI-C3/V
SI-N3/V
SI-S3/V
<2>
SI-EN3/V
SI-T3/V
SI-ET3/V
SI-M3/V
<2>
SI-ES3/V
<2>
SI-EP3/V
<2>
SI-EM3/V
<2>
SI-W3/V
<2>
SI-EL3/V
YASKAWA ELECTRIC SIEP C710606 16C YASKAWA AC Drive – V1000 Technical Manual
Interface Options
Others
—
—
Description
External potentiometer for setting the frequency
reference by an analog input
Knob for frequency reference potentiometer
Plate with scale for frequency reference setting
potentiometer
Remote operator with 8 languages clear text LCD
display and copy function; Cable length max. 3 m
Allows the user to copy and verify parameter
settings between drives. Can also be used as
adapter to connect the drive to a PC USB port
Cable to connect the drive to a serial port of a PC
(3m)
Extension cable (1 m or 3 m) to connect an external
operator to the drive
Installation kit for mounting the drive with the
heatsink outside of the panel (side-by-side
mounting possible)
Installation kit for mounting the drive on a DIN
rail
Parts to make the drive conform to NEMA Type
1 enclosure
Provides power to the control circuit and option
boards in the event of power loss. Allows the user
to monitor drive settings and fault information
when the main circuit has no power.
PC tool for drive setup and parameter management
The installation files can be obtained at no charge
from:
Japan: http://www.e-mechatronics.com
Other areas: Contact a Yaskawa representative.
PC tool for enhanced programming of the drive
Connects to a PROFIBUS-DP network
Connects to a CC-Link network
Connects to a DeviceNet network
Connects to a CANopen network
Connects to an EtherNet/IP network
Connects to a MECHATROLINK-II network
Connects to a MECHATROLINK-III network
Connects to a CompoNet network
Connects to an EtherCAT network
Connects to a PROFINET network
Connects to a Modbus/TCP network
Connects to a LonWorks network
Connects to a POWERLINK network