Using The Digital Led Operator; Using The Digital Led Operator; Keys, Displays, And Leds - YASKAWA V1000 Technical Manual

4.2 Using the Digital LED Operator

4.2

Using the Digital LED Operator

Use the LED operator to enter run and stop commands, display data, edit parameters, as well as display fault and alarm
information.
u

Keys, Displays, and LEDs

No. Display
1
2
3
4
5
6
7
STOP
8
9
10
11
78
1
2
3
10
4
STOP
STOP
V1000
(Hz)
Fref :
FWD/REV Sel :
Fout : (Hz)
(A)
lout :
Mon1 : (V)
Monitor :
Verify :
SetUpGuide :
Program :
Auto-Tuning :
WARNING
Risk of electric shock.
Read manual before installing.
Wait 1 minute for capacitor discharge after
disconnecting power supply.
To conform to requirements, make sure to
ground the supply neutral for 400V class.
Table 4.1 Keys and Displays on the LED Operator
Name
Data Display Area
ESC Key
RESET Key
RUN Key
Up Arrow Key
Down Arrow Key
STOP Key
ENTER Key
LO/RE Selection Key
RUN Light
LO/RE Light
13
12
11
5
STOP
7
6
Displays the frequency reference, parameter number, etc.
Returns to the previous menu.
Moves the cursor to the right.
Resets the drive to clear a fault situation.
Starts the drive.
Scrolls up to select parameter numbers, setting values, etc.
Scrolls down to select parameter numbers, setting values, etc.
Stops the drive.
Note: Stop priority circuit. Pressing the STOP key will always cause the drive
to stop the motor, even when a Run command is active at an external Run
command source. Set parameter o2-06 to 0 to disable the STOP key priority.
Selects all modes, parameters, settings, etc.
Selects a menu item to move from one display screen to the next.
Switches drive control between the operator (LOCAL) and the control circuit
terminals (REMOTE).
Note: LOCAL/REMOTE key effective during stop in drive mode. If the digital
operator could change from REMOTE to LOCAL by incorrect operation, set
o2-01 (LOCAL/REMOTE Key Function Selection) to "0" (disabled) to disable
LOCAL/REMOTE key.
Lit while the drive is operating the motor.
Lit while the operator (LOCAL) is selected to run the drive.
YASKAWA ELECTRIC SIEP C710606 16C YASKAWA AC Drive – V1000 Technical Manual
9
15
14
16
8
Function