Lo/Re Led And Run Led Indications - YASKAWA V1000 Technical Manual

4.2 Using the Digital LED Operator
u

LO/RE LED and RUN LED Indications

LED Lit
When a Run command is
selected from the LED
operator (LOCAL)
During Run
As shown
<1> Refer to Figure 4.1 for the difference between "flashing" and "flashing quickly".
<2> Refer to the description for parameter U4-21 on page
80
Flashing
• During deceleration to stop
• When a Run command is
input and frequency reference
is 0
ON
Flashing
Flashing
ON ON
quickly
Figure 4.1 RUN LED Status and Meaning
Drive output frequency
during stop
/
6 Hz
0 Hz
Frequency setting
OFF
RUN LED
Figure 4.2 RUN LED and Drive Operation
Flashing Quickly
–
• During deceleration at a
fast-stop.
• During stop by interlock
operation.
376 for information on verifying operation interlock.
1 s
ON
ON
RUN
STOP
ON
YASKAWA ELECTRIC SIEP C710606 16C YASKAWA AC Drive – V1000 Technical Manual
<1>
Run command is selected from
– device other than LED operator
(REMOTE)
During stop
<2>
ON
RUN
STOP
OFF OFF
Flashing
Off