YASKAWA V1000 Technical Manual page 316

8.6 Connecting an Option Card
A – Line up the tab with the mounting
Note: Gently pack wires to fit behind the left and right side of the cover into the provided recess.
5.
Connect the lead from the drive ground terminal to the same terminal as the option card lead.
The option card lead should exit through the holes provided on the underside of the drive as it gets routed passed
the ground terminal.
A – Drive ground terminal
B – Route the lead wire on the inside
C – Ground lead
6.
Reattach the option card cover.
A –Align the tab with the mounting hole.
316
hole.
Figure 8.14 Attach Option Card
D
of the lower cover.
Figure 8.15 Lead Wire Connection
Figure 8.16 Reattach Cover
A
B
B – Line up the tab with the mounting
hole.
E
A
B
C
D – Ground lead through-hole
E – Ground lead
A
YASKAWA ELECTRIC SIEP C710606 16C YASKAWA AC Drive – V1000 Technical Manual