Acl Vlan Access Map - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
From Port ~ To Port
Action
Type
ACL Name
Direction
Click the Apply button to accept the changes made.

ACL VLAN Access Map

On this page, users can view and configure the ACL VLAN access map settings. To view the following
window, click ACL > ACL VLAN Access Map, as shown below:
The fields that can be configured are described below:
Parameter
Access Map Name
Sub Map Number
Action
Counter State
Click the Apply button to accept the changes made.
Click the Clear All Counter button to clear the counter information for all the access maps.
Click the Clear Counter button to the clear the counter information for the specified access map.
Click the Find button to locate a specific entry based on the information entered.
Select the range of ports that will be used for this configuration here.
Select the action that will be taken here. Options to choose from are
Add and Delete.
Select the ACL type here. Options to choose from are IP ACL, IPv6
ACL, MAC ACL, and Expert ACL.
Enter the ACL profile's name here. This name can be up to 32
characters long.
Select the direction here. Options to choose from are In and Out.
Figure 8-75 ACL VLAN Access Map Window
Description
Enter the access map's name here. This name can be up to 32
characters long.
Enter the sub-map's number here. This value must be between 1 and
65535.
Select the action that will be taken here. Options to choose from are
Forward, Drop, and Redirect. When the Redirect option is selected,
select the redirected interface from the drop-down list.
Select whether to enable or disable the counter state.
148