Time Range Commands - D-Link DXS-1210-12TC Reference Manual

46. Time Range Commands

46-1
This command is used to specify the period of time for a time range profile. This command is used in
the time-range configuration mode.
periodic {daily HH:MM to HH:MM | weekly WEEKLY-DAY HH:MM to [WEEKLY-DAY] HH:MM}
no periodic {daily HH:MM to HH:MM | weekly WEEKLY-DAY HH:MM to [WEEKLY-DAY]
HH:MM}
Parameters
daily HH:MM to HH:MM
weekly WEEK-DAY HH:MM to
[WEEK-DAY] HH:MM
Default
None.
Command Mode
Time-range Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
A new period can be partially overlapped with an older one. If a new period's starting and ending time
is respectively the same as a previous period, an error message will be displayed and the new period
will not be allowed. When specifying a period to remove, it must be the same period originally added
and cannot be a partial range of a period or multiple periods configured. Otherwise, an error message
will be displayed.
Example
This example shows how to create a time-range that include daily 09:00 to 12:00, 00:00 Saturday to
00:00 Monday and delete the period for daily 09:00 to 12:00.
Switch# configure terminal
Switch(config)#time-range rdtime
Switch(config-time-range)# periodic daily 9:00 to 12:00
Switch(config-time-range)# periodic weekly saturday 00:00 to monday 00:00
Switch(config-time-range)# no periodic daily 9:00 to 12:00
Switch(config-time-range)#
46-2
This command is used to display the time range profile configuration.
show time-range [NAME]
DXS-1210 Series Smart Managed Switch CLI Reference Guide
periodic
Specifies the time of the day, using the format HH:MM (for example,
18:30).
Specifies the day of the week and the time of day in the format day
HH:MM, where the day of the week is spelled out (monday, tuesday,
wednesday, thursday, friday, saturday, and sunday). If the ending day
of the week is the same as the starting day of the week, it can be
omitted.
show time-range
352