Installing An Mx5, Mx10, Mx40, And Mx80 Fan Tray; Maintaining The Mx5, Mx10, Mx40, And Mx80 Mics And Transceivers; Maintaining The Mx5, Mx10, Mx40, And Mx80 Mics; Figure 41: Removing The Fan Tray - Juniper MX5 Hardware Manual

Maintaining the MX5, MX10, MX40, and MX80 MICs and Transceivers

Maintaining the MX5, MX10, MX40, and MX80 MICs

Purpose
Copyright © 2019, Juniper Networks, Inc.

Figure 41: Removing the Fan Tray

Installing an MX5, MX10, MX40, and MX80 Fan Tray

To install the fan tray (see
Attach an ESD grounding strap to your bare wrist and connect the strap to one of the
1.
ESD points on the chassis.
Grasp the fan tray handle, and insert it straight into the chassis.
2.
Tighten the captive screw on the fan tray faceplate to secure it in the chassis.
3.

Figure 42: Installing the Fan Tray

Maintaining the MX5, MX10, MX40, and MX80 MICs on page 103
Replacing an MX5, MX10, MX40, and MX80 MIC on page 104
Replacing an MX5, MX10, MX40, and MX80 SFP or XFP Transceiver on page 111
Maintaining Cables That Connect to MX5, MX10, MX40, and MX80 MICs on page 113
For optimum router performance, verify the condition of the MICs.
Figure 42 on page 103):
Chapter 4: Maintaining Components
103