Installing An Acx4000 Fan Tray - Juniper ACX4000 Hardware Manual

4. Place one hand under the fan tray to support it, and pull the fan tray completely out of the chassis.
Figure 33: Removing the Fan Tray
SEE ALSO
ACX4000 Cooling System | 56
Replacing an ACX4000 Air Filter | 134
Replacing an ACX4000 Fan Tray | 137

Installing an ACX4000 Fan Tray

To install the fan tray (see
1. Attach an ESD grounding strap to your bare wrist, and connect the other end of the strap to an ESD
grounding point.
2. Orient the fan tray in the slot so that the arrow is pointing up, and slide the fan tray straight into the
chassis.
3. Verify that the ejector lever on the front of the fan tray is engaged by pushing it toward the router.
Figure 10):
138