Virtual Routing And Forwarding (Vrf) - Dell S4810 Reference Manual

Virtual Routing and Forwarding (VRF)

Virtual Routing and Forwarding (VRF) allows multiple instances of a routing table to co-exist on the same
router at the same time. Virtual Routing and Forwarding (VRF) is supported on the S-Series platforms.
ip vrf
Creates a customer VRF.
S4810
Syntax
ip vrf {vrf-name | management} [vrf_id]
To delete a customer VRF, use the no ip vrf {vrf-name | management}
[vrf_id] command.
Parameters
vrf-name
management
vrf_id
Defaults Available by default.
Command CONFIG
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OSCommand Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.4(0.0)
Usage
Use this command to create or delete a customer VRF. You cannot use the
Information
keyword default as a VRF name as it indicates a special VRF. Use the keyword
management to create a management VRF. You need not provide a VRF ID while
creating a management VRF. For other types of VRFs, VRF ID is an optional
parameter. All values in the valid range that are not already taken are allowed.
Virtual Routing and Forwarding (VRF)
Enter the name of the VRF that you want to create.
Enter the name of the management VRF.
Enter the ID of the VRF that you want to create.
Introduced on the S4810 and S4820T.
64
1703