Cflowd Configuration Management Tasks; Modifying Global Cflowd Components - Alcatel-Lucent 7450 Configuration Manual

Cflowd Configuration Management Tasks

Cflowd Configuration Management Tasks
This section discusses the following cflowd configuration management tasks:
•
•

Modifying Global Cflowd Components

Cflowd parameter modifications apply to all instances where cflowd or traffic sampling is enabled.
Changes are applied immediately. Use the following cflowd commands to modify global cflowd
parameters:
CLI Syntax: config>cflowd#
The following example displays the cflowd command usage to modify configuration parameters:
Example: config>cflowd# active-timeout 60
The following example displays the common cflowd component configuration:
A:ALA-1>config>cflowd# info
#------------------------------------------
#------------------------------------------
A:ALA-1>config>cflowd#
Page 632
Modifying Global Cflowd Components on page 632
Modifying Cflowd Collector Parameters on page 633
active-timeout minutes
no active-timeout
cache-size num-entries
no cache-size
inactive-timeout seconds
no inactive-timeout
overflow percent
no overflow
rate sample-rate
no rate
[no] shutdown
template-retransmit seconds
no template-retransmit
config>cflowd# no inactive-timeout
config>cflowd# overflow 2
config>cflowd# rate 10
active-timeout 60
overflow 2
rate 10
7450 ESS Router Configuration Guide