Alcatel-Lucent 7450 Configuration Manual page 223

ARP Table
===============================================================================
IP Address
-------------------------------------------------------------------------------
10.10.13.1
===============================================================================
A:ALA-A#
authentication
Syntax authentication
Context show>router
Description This command enables the command to display authentication statistics.
statistics
Syntax statistics
statistics interface [ip-int-name | ip-address]
statistics policy name
Context show>router>authentication
Description This command displays interface or policy authentication statistics.
Parameters interface [ip-int-name | ip-address] — Specifies an existing interface name or IP address.
policy name — Specifies an existing policy name.
Output Authentication Statistics Output — The following table describes the show authentication
statistics output fields:
Client Packets
Authenticate Fail
Client Packets
Authenticate Ok
Sample Output
A:ALU-3>show>router>auth# statistics
===================================================================
Authentication Global Statistics
===================================================================
Client Packets Authenticate Fail
7450 ESS Router Configuration Guide
MAC Address
04:5b:01:01:00:02 03:53:09
Values ip-int-name: 32 chars max
ip-address: a.b.c.d
Label
The number of packets that failed authentication.
The number of packets that were authenticated.
Expiry Type Interface
Dyn to-ser1
Description
: 0
IP Router Configuration
Page 223