Alcatel-Lucent 7450 Configuration Manual page 540

MAC Filter Entry Commands
SONET/SDH IPCP
SONET/SDH BCP-Null
SONET/SDH BCP-Dot1q
sdp-id — The SDP identifier.
vc-id — The virtual circuit identifier. This value is used to validate the VC ID portion of each mesh
match
Syntax match [frame-type 802dot3 | 802dot2-llc | 802dot2-snap | ethernet_II]
no match
Context config>filter>mac-filter>entry
Description This command creates the context for entering/editing match criteria for the filter entry and specifies
an Ethernet frame type for the entry.
A match context may consist of multiple match criteria, but multiple match statements cannot be
entered per entry.
The no form of the command removes the match criteria for the entry-id.
Parameters frame-type keyword — The frame-type keyword configures an Ethernet frame type to be used for
802dot3 — Specifies the frame type is Ethernet IEEE 802.3.
802dot2-llc — Specifies the frame type is Ethernet IEEE 802.2 LLC.
802dot2-snap — Specifies the frame type is Ethernet IEEE 802.2 SNAP.
ethernet_II — Specifies the frame type is Ethernet Type II.
Page 540
-
0
0 — 4094
Values 1 — 17407
SDP binding defined in the service. The default value of this object is equal to the service ID.
Values
1 — 4294967295
the MAC filter match criteria.
Default 802dot3ethernet_II
Values
802dot3, 802dot2-llc, 802dot2-snap, ethernet_II
The SAP is identified by the channel. No BCP is
deployed and all traffic is IP.
The SAP is identified with a single service on the
channel. Tags are assumed to be part of the customer
packet and not a service delimiter.
The SAP is identified by the 802.1Q tag on the channel.
7450 ESS Router Configuration Guide