Alcatel-Lucent 7450 Configuration Manual page 508

Filter Log Commands
Filter Log Commands
destination
Syntax destination memory num-entries
destination syslog syslog-id
no destination
Context config>filter>log
Description
This command configures the destination for filter log entries for the filter log ID.
Filter logs can be sent to either memory (memory) or to an existing Syslog server definition (syslog).
If the filter log destination is memory, the maximum number of entries in the log must be specified.
The no form of the command deletes the filter log association.
Default no destination
Parameters memory num-entries — Specifies the destination of the filter log ID is a memory log. The num-
syslog syslog-id — Specifies the destination of the filter log ID is a Syslog server. The syslog-id
shutdown
Syntax [no] shutdown
Context config>filter>log
config>filter>log>summary
Administratively enables/disabled (AdminUp/AdminDown) an entity. Downing an entity does not
change, reset or remove any configuration settings or statistics. Many objects must be shutdown
before they may be deleted.
The shutdown command administratively downs an entity. Administratively downing an entity
changes the operational state of the entity to down.
Unlike other commands and parameters where the default state will not be indicated in the
configuration file, shutdown and no shutdown are always indicated in system generated
configuration files.
The no form of the command puts an entity into the administratively enabled state.
Default no shutdown
Page 508
entries value is the maximum number of entries in the filter log expressed as a decimal integer.
Values 10 — 50000
parameter is the number of the Syslog server definition.
Values 1 — 10
7450 ESS Router Configuration Guide