Common Configuration Tasks - Alcatel-Lucent 7450 Configuration Manual

Hide thumbs Also See for 7450:

Table of Contents

Common Configuration Tasks

This section provides a brief overview of the tasks that must be performed to configure VRRP

and provides the CLI commands.

VRRP parameters are defined under a service interface or a router interface context. An IP

address must be assigned to each IP interface. Only one IP address can be associated with an IP

interface but several secondary IP addresses also be associated.

Owner and non-owner configurations must include the following parameters:

Other owner and non-owner configurations include the following optional commands:

In addition to the common parameters, the following non-owner commands can be configured:

All participating routers in a VRRP instance must be configured with the same vrid.

All participating non-owner routers can specify up to 16 backup IP addresses (IP

addresses the master is representing). The owner configuration must include at least

one backup IP address.

authentication-type

authentication-key

master-int-inherit

telnet-reply

ssh-reply (IPv4 only)

[no] shutdown

7450 ESS Router Configuration Guide