Alcatel-Lucent 7450 Configuration Manual page 239

fp-tunnel-table
Syntax fp-tunnel-table slot-number [ip-prefix/prefix-length]
Context show>router
Description
This command displays the IOM/IMM label, next-hop and outgoing interface information for BGP,
LDP and RSVP tunnels used in any of the following applications:
• BGP shortcut (configure>router>bgp>igp-shortcut)
• IGP shortcut (config>router>isis[ospf]>rsvp-shortcut)
• IGP prefix resolved to an LDP LSP (config>router>ldp-shortcut)
• Static prefix shortcut
• VPRN auto-bind
• 6PE/6VPE.
Parameters slot-number — Displays information for the specified slot.
ip-prefix[/prefix-length] — Displays routes only matching the specified ip-address and length.
Sample Output
*A:Dut-C# show router fp-tunnel-table 1
===============================================================================
Tunnel Table Display
Legend:
B - FRR Backup
===============================================================================
Destination
-------------------------------------------------------------------------------
4.0.0.1/32
10.20.1.2/32
10.20.1.4/32
7450 ESS Router Configuration Guide
Values 1 — 10
Values ipv4-prefix:
ipv4-prefix-length:
x:x:x:x:x:x:x:x (eight 16-bit pieces)
prefix-length:
Lbl
20001
20001/21005
21002
21002/21005
a.b.c.d (host bits must be set to 0)
0 — 32ipv6
x:x:x:x:x:x:d.d.d.d
x: [0 — FFFF]H
d: [0 — 255]D
1 — 128ipv6
NextHop Intf/Tunnel
1.3.4.4 2/1/3:1
1.2.3.2(B) 1/1/2
1.2.3.2 1/1/2
1.3.4.4(B) 2/1/3:1
IP Router Configuration
ipv6-prefix[/pref*:
Protocol Tunnel-ID
SR-ISIS-0 -
SR-ISIS-0 -
SR-ISIS-0 -
Page 239