Alcatel-Lucent 7450 Configuration Manual page 505

Hide thumbs Also See for 7450:

Table of Contents

This command creates a configuration context for an IP (v6) filter policy.

The no form of the command deletes the IP filter policy. A filter policy cannot be deleted until it is

removed from all objects where it is applied.

filter-id — specifies the IPv6 filter policy ID number.

create — Keyword required when first creating the configuration context. Once the context is

filter-name — A string of up to 64 characters uniquely identifying this IPv6 filter policy.

system-filter

system-filter

config>filter

This command enables the context to activate system filter policies.

mac-filter filter-id [create]

mac-filter {filter-id | filter-name}

no mac-filter filter-id

config>filter

This command enables the context for a MAC filter policy.

The no form of the command deletes the mac-filter policy. A filter policy cannot be deleted until it is

removed from all objects where it is applied.

filter-id — The MAC filter policy ID number.

create — Keyword required when first creating the configuration context. Once the context is

filter-name — A string of up to 64 characters uniquely identifying this filter policy.

redirect-policy

[no] redirect-policy redirect-policy-name

config>filter

7450 ESS Router Configuration Guide

created, one can navigate into the context without the create keyword.

created, one can navigate into the context without the create keyword.

Filter Policies