Global Filter Commands - Alcatel-Lucent 7450 Configuration Manual

Global Filter Commands

Global Filter Commands
dhcp-filter
Syntax dhcp-filter filter-id [create]
no dhcp-filter filter-id
Context config>filter
Description This command configures the identification number of a DHCP filter.
Parameters
filter-id — Specifies the DHCP filter policy ID number.
create — Keyword required when first creating the configuration context. Once the context is
filter-name — A string of up to 64 characters uniquely identifying this filter policy.
ip-filter
Syntax ip-filter filter-id [create]
ip-filter {filter-id | filter-name}
no ip-filter filter-id
Context config>filter
Description This command creates a configuration context for an IP (v4) filter policy.
The no form of the command deletes the IP filter policy. A filter policy cannot be deleted until it is
removed from all objects where it is applied.
Parameters filter-id — Specifies the IP filter policy ID number.
create — Keyword required when first creating the configuration context. Once the context is
filter-name — A string of up to 64 characters uniquely identifying this filter policy.
ipv6-filter
Syntax ipv6-filter filter-id [create]
ip-filter {filter-id | filter-name}
no ipv6-filter ipv6-filter-id
Context config>filter
Page 504
Values 1 — 65535
created, one can navigate into the context without the create keyword.
Values 1 — 65535
created, one can navigate into the context without the create keyword.
7450 ESS Router Configuration Guide