Alcatel-Lucent 7450 Configuration Manual page 570

Show Commands
mac
Syntax mac [mac-filter-id [associations | counters] [entry entry-id]]
Context show>filter
Description
This command displays MAC filter information.
Parameters mac-filter-id — Displays detailed information for the specified filter ID and its filter entries.
associations — Appends information as to where the filter policy ID is applied to the detailed filter
counters — Displays counter information for the specified filter ID.
entry entry-id — Displays information on the specified filter entry ID for the specified filter ID only.
Output No Parameters Specified — When no parameters are specified, a brief listing of IP filters is
produced. The following table describes the command output for the command.
Filter ID Specified — When the filter ID is specified, detailed filter information for the filter ID
and its entries is produced. The following table describes the command output for the command.
Page 570
Values
1— 65535
policy ID output.
Values
1 — 65535
Label
Filter Id
Scope
Applied
Description
Label
The MAC filter policy ID.
MAC Filter
Filter Id
Scope Template —
Exclusiv —
The IP filter policy description.
Description
Applied No —
Yes —
The IP filter ID
The filter policy is of type Template.
Template —
The filter policy is of type Exclusive.
Exclusiv —
The filter policy ID has not been applied.
No —
The filter policy ID is applied.
Yes —
The MAC filter policy description.
The filter policy is of type Template.
The filter policy is of type Exclusive.
The filter policy ID has not been applied.
The filter policy ID is applied.
7450 ESS Router Configuration Guide
Description
Description