Alcatel-Lucent 7450 Configuration Manual page 227

port-1-3
port-1-3
port-1-4
port-1-4
port-1-5
...
===============================================================================
*A:Dut-B#
session
Syntax session [src ip-address [dst ip-address] | detail]
session [type type]
session [summary]
Context show>router>bfd
Description This command displays session information.
Parameters ip-address — Only displays the interface information associated with the specified IP address.
type — Specifies the session type.
Output BFD Session Output — The following table describes the show BFD session output fields:
State
Protocol
Tx Intvl
Tx Pkts
Rx Intvl
Rx Pkts
Mult
Sample Output
A:Dut-B# show router bfd session
===============================================================================
BFD Session
7450 ESS Router Configuration Guide
Values ipv4-address
Values iom | central | cpm-np
Label
Displays the administrative state for this BFD session.
Displays the active protocol.
Displays the interval, in milliseconds, between the transmitted BFD mes-
sages to maintain the session
Displays the number of transmitted BFD packets.
Displays the expected interval, in milliseconds, between the received BFD
messages to maintain the session
Displays the number of received packets.
Displays the integer used by BFD to declare when the neighbor is down.
500 500
10 10
500 500
10 10
500 500
a.b.c.d (host bits must be 0)
Description
IP Router Configuration
3
3
3
3
3
Page 227