Alcatel-Lucent 7450 Configuration Manual page 166

Router Interface Commands
Parameters
ip-address — The IP address of the IP interface. The ip-addr portion of the address command
/ — The forward slash is a parameter delimiter that separates the ip-addr portion of the IP address
mask-length — The subnet mask length when the IP prefix is specified in CIDR notation. When the
mask — The subnet mask in dotted decimal notation. When the IP prefix is not specified in CIDR
netmask — The subnet mask in dotted decimal notation.
broadcast {all-ones | host-ones} — The optional broadcast parameter overrides the default
Page 166
specifies the IP host address that will be used by the IP interface within the subnet. This address
must be unique within the subnet and specified in dotted decimal notation.
Values
1.0.0.0 — 223.255.255.255
from the mask that defines the scope of the local subnet. No spaces are allowed between the ip-
addr, the "/" and the mask-length parameter. If a forward slash does not ediately follow the ip-
addr, a dotted decimal mask must follow the prefix.
IP prefix is specified in CIDR notation, a forward slash (/) separates the ip-addr from the mask-
length parameter. The mask length parameter indicates the number of bits used for the network
portion of the IP address; the remainder of the IP address is used to determine the host portion of
the IP address. Allowed values are integers in the range 1— 32. Note that a mask length of 32 is
reserved for system IP addresses.
Values 1 — 32
notation, a space separates the ip-addr from a traditional dotted decimal mask. The mask
parameter indicates the complete mask that will be used in a logical 'AND' function to derive the
local subnet of the IP address. Note that a mask of 255.255.255.255 is reserved for system IP
addresses.
Values 128.0.0.0 — 255.255.255.255
Values 0.0.0.0 — 255.255.255.255 (network bits all 1 and host bits all 0)
broadcast address used by the IP interface when sourcing IP broadcasts on the IP interface. If no
broadcast format is specified for the IP address, the default value is host-ones, which indictates a
subnet broadcast address. Use this parameter to change the broadcast address to all-ones or
revert back to a broadcast address of host-ones.
The all-ones keyword following the broadcast parameter specifies that the broadcast address
used by the IP interface for this IP address will be 255.255.255.255, also known as the local
broadcast.
The host-ones keyword following the broadcast parameter specifies that the broadcast address
used by the IP interface for this IP address will be the subnet broadcast address. This is an IP
address that corresponds to the local subnet described by the ip-addr and the mask-length or
mask with all the host bits set to binary 1. This is the default broadcast address used by an IP
interface.
The broadcast parameter within the address command does not have a negate feature, which is
usually used to revert a parameter to the default value. To change the broadcast type to host-
ones after being changed to all-ones, the address command must be executed with the
broadcast parameter defined.
The broadcast format on an IP interface can be specified when the IP address is assigned or
changed.
7450 ESS Router Configuration Guide