Vrrp Ies Service Parameters - Alcatel-Lucent 7450 Configuration Manual

VRRP IES Service Parameters

VRRP IES Service Parameters
VRRP parameters are configured within an IES service with two contexts, owner or non-
owner. The status is specified when the VRRP configuration is created. When configured as
owner, the virtual router instance owns the backup IP addresses. All other virtual router
instances participating in this message domain must have the same vrid configured and cannot
be configured as owner.
For IPv4, up to 4 virtual routers IDs (vrid) can be configured on an IES service interface. Each
virtual router instance can manage up to 16 backup IP addresses.
VRRP parameters configured within an IES service must include the following:
The following example displays a sample configuration of a IES service owner and non-owner
VRRP configurations.
A:SR2>config>service>ies# info
----------------------------------------------
----------------------------------------------
A:SR2>config>service>ies#
Page 366
• VRID
• Backup IP address(es)
interface "tuesday" create
address 10.10.36.2/24
sap 7/1/1.2.2 create
vrrp 19 owner
backup 10.10.36.2
authentication-type password
authentication-key "testabc"
exit
exit
interface "testing" create
address 10.10.10.16/24
sap 1/1/55:0 create
vrrp 12
backup 10.10.10.15
policy 1
authentication-type password
authentication-key "testabc"
exit
exit
no shutdown
7450 ESS Router Configuration Guide