Alcatel-Lucent 7450 Configuration Manual page 535

Please see general description related to match-list usage in filter policies.
Parameters
ipv6-prefix-list-name — A string of up to 32 characters of printable ASCII characters. If special
apply-path
Syntax apply-path
no apply-path
Context config>filter>match-list>ip-pfx-list
config>filter>match-list>ipv6-pfx-list
Description
This command enables context to configure auto-generation of address prefixes for IPv4 or IPv6
address prefix match lists. The context the command is executed governs whether IPv4 or IPv6
prefixes will be auto-generated.
The no form of this command removes all auto-generation configuration under the apply-path
context.
Default no apply path
bgp-peers
Syntax bgp-peers index group reg-exp neighbor reg-exp
no bgp-peers index
Context config>filter>match-list>ip-pfx-list>apply-path
config>filter>match-list>ipv6-pfx-list>apply-path
Description This command configures auto-generation of IPv4 or IPv6 address prefixes (as required by the
context the command is executed within) based on the base router BGP instance configuration.
The no form of this command removes the bgp-peers configuration for auto-generation of address
prefixes for the specified index value.
Default No embedded filter policies are included in a filter policy.
Parameters index — An integer from 1 to 255 enumerating bgp-peers auto-generation configuration within this
7450 ESS Router Configuration Guide
characters are used, the string must be enclosed within double quotes.
group:
Configures a match against base router BGP instance group configuration.
Regex wildcard match (.*) can be used to match against any group.
neighbor:
Configures a match against base router BGP instance neighbor configuration.
Regex wildcard match (.*) can be used to match against any neighbor.
list.
Filter Policies
Page 535