Alcatel-Lucent 7450 Configuration Manual page 649

Hide thumbs Also See for 7450:

Table of Contents

ip-int-name — Display only information for the IP interface with the specified name.

cflowd Interface Output — The following table describes the show cflowd interface output

IPv4 Address

IPv6 Address

Sample Output

B:sr-002# show cflowd interface [ip-addr | ip-int-name]

===============================================================================

Cflowd Interfaces

===============================================================================

IPv4 Address

IPv6 Address

-------------------------------------------------------------------------------

ipv4ipv6NamedIf

-------------------------------------------------------------------------------

Interfaces : 3

===============================================================================

7450 ESS Router Configuration GuidePage 649

all interfaces with cflowd enabled.

Displays the physical port identifier.

Displays the primary IPv4 address for the associated IP interface.

Displays the primary IPv6 address for the associated IP interface.

Displays the virtual router index (Base = 0).

Displays the Global IP interface index.

Displays the cflowd sampling type and direction.

intf — Interface based sampling

acl — ACL based sampling

ingr — Ingress sampling

egr — Egress sampling

both — Both ingress and egress sampling

Displays the administrative state of the interface.

Displays the operational state for IPv4 sampling.

Displays the operational state for IPv6 sampling.

10.10.10.10/24

1234:5678::9/128