Basic VRRP Configurations
Configure VRRP parameters in the following contexts:
VRRP Policy
Configuring and applying VRRP policies are optional. There are no default VRRP policies.
Each policy must be explicitly defined. A VRRP configuration must include the following:
The following example displays a sample configuration of a VRRP policy.
A:SR2>config>vrrp>policy# info
----------------------------------------------
----------------------------------------------
7450 ESS Router Configuration Guide
•
VRRP Policy on page 365
•
VRRP IES Service Parameters on page 366
•
VRRP Router Interface Parameters on page 367
•
Policy ID
•
Define at least one of the following priority events:
→ Port down
→ LAG port down
→ Host unreachable
→ Route unknown
delta-in-use-limit 50
priority-event
port-down 4/1/2
hold-set 43200
priority 100 delta
exit
port-down 4/1/3
priority 200 explicit
exit
lag-port-down 1
number-down 3
priority 50 explicit
exit
exit
host-unreachable 10.10.24.4
drop-count 25
exit
route-unknown 10.10.0.0/32
priority 50 delta
exit
exit
Configuring System Management with CLI
Page 365