Alcatel-Lucent 7450 Configuration Manual page 530

IP (v4/v6) Filter Entry Commands
The no form of the command removes the checking of the option field in the IP header as a match
criterion.
Parameters true — Specifies matching on all IP packets that contain the option field in the header. A match will
false — Specifies matching on IP packets that do not have any option field present in the IP header.
port
Syntax port {lt|gt|eq} port-number
port port-list port-list-name
port range port-number port-number
no port
Context config>filter>ip-filter>entry>match
config>filter>ipv6-filter>entry>match
Description
This command configures port match conditions.
Parameters lt|gt|eq — Specifies the lower, greater or equal value for the TCP/UDP/SCTP port range.
port-number — Specifies the name given to this port list.
range port-number port-number — Specifies inclusive port range between two port-number values.
routing-type0
Syntax routing-type0 {true|false}
no routing-type0
Context config>filter>ipv6-filter>entry>match
Description
This command enables match on existence of Routing Type Extension Header type 0 in the IPv6
filter policy.
The no form of this command ignores Routing Type Extension Header type 0 presence/absence in a
packet when evaluating match criteria of a given filter policy entry.
Default no routing-type0
Parameters
true — match if a packet contains Routing Type Extension Header type 0
false — match if a packet does not contain Routing Type Extension Header type 0
Page 530
occur for all packets that have the option field present. An option field of zero is considered as no
option present.
(an option field of zero). An option field of zero is considered as no option present.
Values 0 - 65535
7450 ESS Router Configuration Guide