Alcatel-Lucent 7450 Configuration Manual page 555

url
Syntax url url-string [http-version version-string]
Context config>filter>redirect-policy>destination>url-test
Description This command specifies the URL to be probed by the URL test.
Default
none
Parameters url-string — Specify a URL up to 255 characters in length.
http-version version-string — Specifies the HTTP version, 80 characters in length.
router
Syntax router router-instance
router service-name service-name
no router
Context config>filter>redirect-policy
Description This command enhances VRF support in redirect policies. When a router instance is specified, the
configured destination tests are run in the specified router instance, and the PBR action is executed in
the specified router instance. Note that if no destination is active or if the hardware does not support
PBR action "next-hop router", action forward will be executed (i.e. routing will be performed in the
context of the incoming interface routing instance).
The no form of the command preserves backward-compatibility. Tests always run in the "Base"
routing instance context, and the PBR action executes in the routing context of the ingress interface
that the filter using this redirect policy is deployed on.
Default no router
Parameters router-instance — Specifies a router instance in the form of router-name or service-id.
service-name — Specifies the name of a configured Layer 3 service.
shutdown
Syntax [no] shutdown
Context config>filter>redirect-policy
config>filter>redirect-policy>destination
Description Administratively enables/disabled (AdminUp/AdminDown) an entity. Downing an entity does not
change, reset or remove any configuration settings or statistics. Many objects must be shutdown
before they may be deleted.
7450 ESS Router Configuration Guide
Values router-name — "Base"
service-id — an existing Layer 3 service [1..2147483647]
Filter Policies
Page 555