Alcatel-Lucent 7450 Configuration Manual page 215

Parameters
ip-int-name — Specify the interface name. If the string contains special characters (#, $, spaces, etc.),
current-hop-limit
Syntax current-hop-limit number
no current-hop-limit
Context config>router>router-advert>if
Description This command configures the current-hop-limit in the router advertisement messages. It informs the
nodes on the subnet about the hop-limit when originating packets.
Default 64
Parameters number — Specifies the hop limit.
managed-configuration
Syntax [no] managed-configuration
Context config>router>router-advert>if
Description This command sets the managed address configuration flag. This flag indicates that DHCPv6 is
available for address configuration in addition to any address autoconfigured using stateless address
autoconfiguration. .
Default no managed-configuration
max-advertisement-interval
Syntax [no] max-advertisement-interval seconds
Context config>router>router-advert>if
Description This command configures the maximum interval between sending router advertisement messages.
Default
600
Parameters seconds — Specifies the maximum interval in seconds between sending router advertisement
7450 ESS Router Configuration Guide
the entire string must be enclosed within double quotes.
Values 0 — 255. A value of zero means there is an unspecified number of hops.
messages.
Values 4 — 1800
IP Router Configuration
Page 215