Alcatel-Lucent 7450 Configuration Manual page 534

Match List Configuration Commands
Match List Configuration Commands
match-list
Syntax match-list
Context config>filter
Description This command enables the configuration context for match lists to be used in filter policies (IOM and
CPM).
ip-prefix-list
Syntax ip-prefix-list ip-prefix-list-name create
no ip-prefix-list ip-prefix-list-name
Context config>filter>match-list
Description This command creates a list of IPv4 prefixes for match criteria in IPv4 ACL and CPM filter policies.
The no form of this command deletes the specified list.
Operational notes:
An ip-prefix-list must contain only IPv4 address prefixes.
An IPv4 prefix match list cannot be deleted if it is referenced by a filter policy.
Please see general description related to match-list usage in filter policies.
Default none
Parameters
ip-prefix-list-name — A string of up to 32 characters of printable ASCII characters. If special
ipv6-prefix-list
Syntax ipv6-prefix-list ipv6-prefix-list-name create
no ipv6-prefix-list ipv6-prefix-list-name
Context config>filter>match-list
Description
This command creates a list of IPv6 prefixes for match criteria in ACL and CPM IPv6 filter policies.
The no form of this command deletes the specified list.
Operational notes:
An ipv6-prefix-list must contain only IPv6 address prefixes.
An IPv6 prefix match list cannot be deleted if it is referenced by a filter policy.
Page 534
characters are used, the string must be enclosed within double quotes.
7450 ESS Router Configuration Guide