Alcatel-Lucent 7450 Configuration Manual page 526

IP (v4/v6) Filter Entry Commands
Parameters
flow-label — Specifies the flow label to be used as a match criterion.
mask — Specifies the flow label mask value for this policy IP Filter entry.
fragment
Syntax IPv4:
fragment {true|false}
no fragment
IPv6:
fragment {true|false|first-only|non-first-only}
no fragment
Context config>filter>ip-filter>entry>match
config>filter>ipv6-filter>entry>match
Description This command specifies match criterion for fragmented packets.
The no form of the command removes the match criterion.
Default
no fragment
Parameters true — Specifies to match on all fragmented IP packets.
false — Specifies to match on all non-fragmented IP packets.
first-only — For IPv6: Matches if a packet is an initial fragment of a fragmented IPv6 packet.
non-first-only — For IPv6: Matches if a packet is a non-initial fragment of a fragmented IPv6
ah-ext-hdr
ah-ext-hdr {true|false }
no ah-ext-hdr
Context config>filter>ipv6-filter>entry>match
Description This command enables match on existence of AH Extension Header in the IPv6 filter policy.
The no form of this command ignores AH Extension Header presence/absence in a packet when
evaluating match criteria of a given filter policy entry.
Default no ah-ext-hdr
Parameters true — Matches a packet with an AH Extension Header.
false — Match a packet without an AH Extension Header.
Page 526
Values 0 — 1048575
Values 0 — 1048575 decimal hex or binary
packet.
7450 ESS Router Configuration Guide