Alcatel-Lucent 7450 Configuration Manual page 559

entry entry-id — Displays information on the specified filter entry ID for the specified filter ID only.
associations — Appends information as to where the filter policy ID is applied to the detailed filter
counters — Displays counter information for the specified filter ID. Note that egress counters count
type entry-type — specifies type of filter entry to display, values:
embedded [failed] — Shows all embeddings, optionally shows failed embedding only, if filter-id is
Output Show Filter (no filter-id specified) — The following table describes the command output for the
command when no filter ID is specified.
Sample Output
A:ALA-49# show filter ip
===============================================================================
IP Filters
===============================================================================
Filter-Id Scope
-------------------------------------------------------------------------------
7450 ESS Router Configuration Guide
Values 1 — 65535
policy ID output.
the packets without Layer 2 encapsulation. Ingress counters count the packets with Layer 2
encapsulation.
Values
not specified shows all embedded filters.
Label
Filter Id
Scope
Applied
Description
In
From
Priority
Inserted
Applied Description
The IP filter ID
The filter policy is of type template.
Template —
The filter policy is of type exclusive.
Exclusive —
The filter policy ID has not been applied.
No —
The filter policy ID is applied.
Yes —
The IP filter policy description.
Shows embedding filter index
Shows embedded filters included
Shows priority of embedded filter
Shows embedded/total number of entries from embedded filter
Status:
OK—embedding operation successful, if any entries are overwritten
this will also be indicated.
Failed—embedding failed, the reason is displayed (out of resources).
Filter Policies
Description
Page 559