Alcatel-Lucent 7450 Configuration Manual page 580

Show Commands
Ing. Matches: 0 pkts
Egr. Matches: 0 pkts
Entry
Description : entry 20
Ing. Matches: 0 pkts
Egr. Matches: 0 pkts
Entry
Description : test 30
Ing. Matches: 0 pkts
Egr. Matches: 0 pkts
Entry
Description : entry 50
Ing. Matches: 0 pkts
Egr. Matches: 0 pkts
redirect-policy
Syntax redirect-policy {redirect-policy-name [dest ip-address] [association]}
Context show>filter
Description This command shows redirect filter information.
Parameters redirect-policy-name — Displays information for the specified redirect policy.
dest ip-address — Directs the router to use a specified IP address for communication.
association — Appends association information.
Output Redirect Policy Output — The following table describes the fields in the redirect policy
command output.
Page 580
: 20
: 30
: 50
Label
Redirect Policy
Applied
Description
Active Destina-
tion
Destination
Oper Priority
Admin Priority
Specifies a specific redirect policy.
Specifies whether the redirect policy is applied to a filter policy entry.
Displays the user-provided description for this redirect policy.
Specifies the IP address of the active destination.
ip address —
Indicates that there is currently no active destination.
none —
Specifies the destination IP address.
Specifies the operational value of the priority for this destination. The
highest operational priority across multiple destinations is used as the
preferred destination.
Specifies the configured base priority for the destination.
7450 ESS Router Configuration Guide
Description