Alcatel-Lucent 7450 Configuration Manual page 210

Router Interface Commands
Description
This command enables the sending of the pool name in the Alcatel vendor-specific suboption of the
DHCP relay packet.
The no form of the command disables the feature.
port-id
Syntax [no] port-id
Context config>router>if>dhcp>option>vendor-specific-option
Description This command enables sending of the port-id in the Alcatel vendor specific suboption of the DHCP
relay packet
The no form of the command disables the sending.
service-id
Syntax [no] service-id
Context config>router>if>dhcp>option>vendor-specific-option
Description This command enables the sending of the service ID in the Alcatel-Lucent vendor specific suboption
of the DHCP relay packet.
The no form of the command disables the sending of the service ID in the Alcatel-Lucent vendor
specific suboption of the DHCP relay packet.
string
Syntax [no] string text
Context config>router>if>dhcp>option>vendor-specific-option
Description This command specifies the vendor specific suboption string of the DHCP relay packet.
The no form of the command returns the default value.
Parameters text — The string can be any combination of ASCII characters up to 32 characters in length. If spaces
system-id
Syntax [no] system-id
Context config>router>if>dhcp>option>vendor-specific-option
Page 210
are used in the string, enclose the entire string in quotation marks (" ").
7450 ESS Router Configuration Guide