Alcatel-Lucent 7450 Configuration Manual page 61

Table 4: BFD Control Packet Field Descriptions (Continued)
Field
Length
My Discriminator
Your Discriminator
Desired Min TX Interval
Required Min RX Inter-
val
Required Min Echo RX
Interval
7450 ESS Router Configuration Guide
Length of the BFD control packet, in bytes.
A unique, nonzero discriminator value generated by the transmitting system, used
to demultiplex multiple BFD sessions between the same pair of systems.
The discriminator received from the corresponding remote system. This field
reflects back the received value of my discriminator, or is zero if that value is
unknown.
This is the minimum interval, in microseconds, that the local system would like to
use when transmitting BFD control packets.
This is the minimum interval, in microseconds, between received BFD control
packets that this system is capable of supporting.
This is the minimum interval, in microseconds, between received BFD echo pack-
ets that this system is capable of supporting. If this value is zero, the transmitting
system does not support the receipt of BFD echo packets.
Description (Continued)
IP Router Configuration
Page 61