Alcatel-Lucent 7450 Configuration Manual page 121

Context config>router>origin-validation
Description This command configures a session with an RPKI local cache server by using the RPKI-Router
protocol. It is over these sessions that the router learns dynamic VRP entries expressing valid origin
AS and prefix associations. SR-OS supports the RPKI-Router protocol over TCP/IPv4 or TCP/IPv6
transport. A 7x50 router can setup an RPKI-Router session using the base routing table or the
management router.
Default no rpki-session
Parameters ip-address — An IPv4 address or an IPv6 address. If the IPv6 address is link-local then the interface
connect-retry
Syntax connect-retry seconds
no connect-retry
Context config>router>origin-validation>rpki-session
Description This command configures the time in seconds to wait between one TCP connection attempt that fails
and the next attempt. The default (with no connect-retry) is 120 seconds.
Default
no connect-retry
Parameters seconds — Specifies time in seconds.
description
Syntax description description-string
no description
Context config>router>origin-validation>rpki-session
Description This command configures a description for an RPKI-Router session.
Default no description
Parameters description-string — Specifies a text string up to 80 characters in length.
local-address
Syntax local-address ip-address
no local-address
Context config>router>origin-validation>rpki-session
7450 ESS Router Configuration Guide
name must be appended to the IPv6 address after a hyphen (-).
Values
1-65535
IP Router Configuration
Page 121