Alcatel-Lucent 7450 Configuration Manual page 313

Hide thumbs Also See for 7450:
Table of Contents

Advertisement

tunnel
Syntax
tunnel [statistics] [detail] [peer ip-address] [state tunnel-state] [remote-connection-id
remote-connection-id (v3)] [group group-name] [assignment-id assignment-id] [local-name
host-name] [remote-name host-name]|
tunnel [statistics] [detail] [peer ip-address] [state tunnel-state] [remote-tunnel-id remote-
tunnel-id (v2)] [group group-name] [assignment-id assignment-id] [local-name host-name]
[remote-name host-name]
tunnel tunnel-id tunnel-id (v2) [statistics] [detail]
tunnel connection-id connection-id (v3) [statistics] [detail]
Context
show>router>l2tp
Description
This command displays L2TP tunnel operational information.
Parameters
statistics — Displays L2TP tunnel statistics.
detail — Displays detailed L2TP tunnel information.
peer ip-address — Displays information for the the IP address of the peer.
state tunnel-state — Displays the operational state of the tunnel.
remote-connection-id remote-connection-id (v3) — Displays information for the specified remote
group group-name — Displays L2TP tunnel information for the specified tunnel group.
assignment-id assignment-id —
local-name host-name — Specifies a local host name used by this system.
remote-name host-name — Specifies a remote host name used by this system.
connection-id connection-id — Specifies the identification number for a Layer Two Tunneling
detail — Displays detailed L2TP session information.
session-id session-id (v2) — Displays information for the specified the L2TP session.
state session-state — Displays the operational state of the L2TP session.
peer ip-address — Displays information for the specified peer IP address.
ipv4-address
tunnel-id tunnel-id (v2) — Displays information for the specified ID of a L2TP tunnel.
7450 ESS Router Configuration Guide
connection ID.
Protocol connection.
Values
1 — 429496729
Values
1 — 65535
Values
closed, closed-by-peer, draining, drained, established, established-idle, idle, wait-
reply, wait-conn
a.b.c.d (host bits must be 0)
IP Router Configuration
Page 313

Advertisement

Table of Contents
loading

Table of Contents