Route Policy Configuration Management Tasks; Editing Policy Statements And Parameters - Alcatel-Lucent 7705 Configuration Manual

Route Policy Configuration Management Tasks

Route Policy Configuration Management Tasks
This section describes the following route policy configuration management tasks:

Editing Policy Statements and Parameters

Route policy statements can be edited to modify, add, or delete parameters. To enter edit
mode, you must enter the begin keyword at the config>router>policy-options
prompt. Other editing commands include:
The following example displays some commands to configure a policy statement. These
commands are configured in the config>router>policy-options context.
Example:
The following example displays the changed configuration.
A:ALU-B>config>router>policy-options>policy-statement# info
----------------------------------------------
446
• Editing Policy Statements and Parameters
• Deleting an Entry
• Deleting a Policy Statement
• the commit command, which saves changes made to route policies during a session
• the abort command, which discards changes that have been made to route policies
during a session
config>router>policy-options# begin
policy-options# policy-statement "1"
policy-statement# description "Level 1"
policy-statement# entry 4
policy-statement>entry$ description "new entry"
policy-statement>entry# from
policy-statement>entry>from$ prefix-list "from hq"
policy-statement>entry>from# exit
policy-statement>entry# action reject
policy-statement>entry# commit
policy-statement>entry# exit
description "Level 1"
entry 1
from
neighbor 10.10.10.104
exit
action accept
exit
exit
7705 SAR OS Router Configuration Guide