Alcatel-Lucent 7450 Configuration Manual page 120

Router Global Commands
Parameters
policy-name — Specifies the policy name.
network-domains
Syntax network-domains
Context config>router
Description This command opens context for defining network-domains. This command is applicable only in the
base routing context.
description
Syntax [no] description string
Context config>router>network-domains>network-domain
Description This command creates a text description stored in the configuration file for a configuration context.
The no form of the command removes the description string from the context.
Default no description
Parameters string — The description character string. Allowed values are any string up to 80 characters long
network-domain
Syntax network-domain network-domain-name [create]
no network-domain network-domain-name
Context config>router>network-domains
Description This command creates network-domains that can be associated with individual interfaces and SDPs.
Default network-domain "default"
Parameters
network-domain-name — Network domain name character string.
rpki-session
Syntax rpki-session ip-address
no rpki-session ip-address
Page 120
Values 32 chars max
composed of printable, 7-bit ASCII characters. If the string contains special character (#, $,
space, etc.), the entire string must be enclosed within double quotes.
7450 ESS Router Configuration Guide