Alcatel-Lucent 7450 Configuration Manual page 265

Peer
-------------------------------------------------------------------------------
No Matching Entries Found
===============================================================================
mvpn
Syntax mvpn
Context show>router router-instance
Description This command displays Multicast VPN related information. The router instance must be specified.
Sample Output
*A:Dut-C# show router 1 mvpn
===============================================================================
MVPN 1 configuration data
===============================================================================
signaling
UMH Selection
vrf-import
vrf-export
vrf-target
C-Mcast Import RT
ipmsi
admin status
hello-interval
tracking support
spmsi
join-tlv-packing
data-delay-interval: 3 seconds
data-threshold
===============================================================================
neighbor
Syntax neighbor [ip-int-name | ip-address | mac ieee-mac-address | summary]
Context show>router
Description This command displays information about the IPv6 neighbor cache.
Parameters ip-int-name — Specify the IP interface name.
ip-address — Specify the address of the IPv6 interface address.
mac ieee-mac-address — Specify the MAC address.
summary — Displays summary neighbor information.
7450 ESS Router Configuration Guide
: Bgp
: Highest-Ip
: N/A
: N/A
: target:1:1
: target:10.20.1.3:2
: pim-asm 224.1.1.1
: Up
: N/A
: Disabled
: pim-ssm 225.0.0.0/32
: N/A
: 224.0.0.0/4 --> 1 kbps
IP Router Configuration
SvcId SDPId
auto-discovery : Enabled
intersite-shared : Enabled
three-way-hello : N/A
hello-multiplier : 35 * 0.1
Improved Assert : N/A
Page 265