Alcatel-Lucent 7450 Configuration Manual page 551

Hide thumbs Also See for 7450:
Table of Contents

Advertisement

drop-count
Syntax
drop-count consecutive-failures [hold-down seconds]
no drop-count
Context
config>filter>destination>ping-test
config>filter>destination>snmp-test
config>filter>destination>url-test
Description
This command specifies the number of consecutive requests that must fail for the destination to be
declared unreachable and the time hold-down time to held destination unreachable before repeating
tests.
Default
drop-count 3 hold-down 0
Parameters
consecutive-failures — Specifies the number of consecutive ping test failures before declaring the
hold-down seconds — The amount of time, in seconds, that the system should be held down if any
interval
Syntax
interval seconds
no interval
Context
config>filter>destination>ping-test
config>filter>destination>snmp-test
config>filter>destination>url-test
Description
This command specifies the amount of time, in seconds, between consecutive requests sent to the far
end host.
Default
1
Parameters
seconds — Specifies the amount of time, in seconds, between consecutive requests sent to the far end
host.
timeout
Syntax
timeout seconds
no timeout
Context
config>filter>destination>snmp-test
config>filter>destination>url-test
7450 ESS Router Configuration Guide
destination down.
Values
1 — 60
of the test has marked it unreachable.
Values
0 — 86400
Values
1 — 60
Filter Policies
Page 551

Advertisement

Table of Contents
loading

Table of Contents