Alcatel-Lucent 7450 Configuration Manual page 380

Command Hierarchies
IPv4 Interface Commands
config
* Note that VRRP commands are applicable to router interfaces, IES interfaces and VPRN,
The authentication-key, authentication-type, bfd-enable, and ssh-reply commands are applicable
only to IPv4 contexts, not IPv6.
Priority Control Event Policy Commands
config
Page 380
— router
— [no] interface
— vrrp
— no vrrp
— vrrp
— [no] policy policy-id [context service-id]
— delta-in-use-limit
— no delta-in-use-limit
— description
— no description
— [no]
interface-name
virtual-router-id [owner] *
virtual-router-id
— authentication-key [authentication-key | hash-key] [hash | hash2]
— no authentication-key
— [no] backup ip-address
— [no] bfd-enable service-id interface interface-name dst-ip ip-address
— [no] bfd-enable interface interface-name dst-ip ip-address
— init-delay seconds
— no init-delay
— mac mac-address
— no mac
— [no] master-int-inherit
— message-interval {[seconds] [milliseconds milliseconds]}
— no message-interval
— [no] ping-reply
— policy policy-id
— no policy
— [no] preempt
— priority priority
— no priority
— [no] ssh-reply
— [no] standby-forwarding
— [no] telnet-reply
— [no] shutdown
— [no] traceroute-reply
limit
description string
priority-event
— [no] host-unreachable
— [no] host-unreachable
7450 ESS Router Configuration Guide
ip-address
ipv6-address