Cflowd - Alcatel-Lucent 7450 Configuration Manual

router service-name service-name — Packets will be routed in the router instance for the specified
nat — Specifies that matching traffic is to be redirected for NAT performed by Integrated Service
nat-type nat-type — Specifies the NAT type to be used when the value of the corresponding filter
reassemble — Specifies packets matching the filter entry are forwarded to the packet reassembly
filter-sample
Syntax [no] filter-sample
Context config>filter>ip-filter>entry
Description This command enabled cflowd sampling for packets matching this filter entry.
If the cflowd is either not enabled or set to cflowd interface mode, this command is ignored.
The no form disables the cflowd sampling using this filter entry.
Default no filter-sample
interface-disable-sample
Syntax [no] interface-disable-sample
Context config>filter>ip-filter>entry
Description This command disables cflowd sampling for packets matching this filter entry for the IP interface is
set to cflowd interface mode. This allows the option to not sample specific types of traffic when
interface sampling is enabled.
If the cflowd is either not enabled or set to cflowd acl mode, this command is ignored.
The no form of this command enables sampling.
Default
no interface-disable-sample
7450 ESS Router Configuration Guide
• $CID — A string that represents the circuit-id or interface-id of the subscriber host
(hexadecimal format).
• $RID — A string that represents the remote-id of the subscriber host (hexadecimal
format).
• $SAPDESC – A configurable string that represents the configured SAP description.
Values 255 characters maximum
service-id instead of the routing instance of the ingress interface.
Adapter(s) running NAT application.
policy object is nat.
Values
dslite, nat64
function in the system.
Filter Policies
Page 521