Alcatel-Lucent 7450 Configuration Manual page 219

Parameters
milli-seconds — Specifies how often the retransmission should occur.
router-lifetime
Syntax router-lifetime seconds
no router-lifetime
Context config>router>router-advert>if
Description This command sets the router lifetime.
Default 1800
Parameters
seconds — The length of time, in seconds, (relative to the time the packet is sent) that the prefix is
use-virtual-mac
Syntax [no] use-virtual-mac
Context config>router>router-advert>if
Description This command enables sending router advertisement messages using the VRRP virtual MAC address,
provided that the virtual router is currently the master.
If the virtual router is not the master, no router advertisement messages are sent.
The no form of the command disables sending router advertisement messages.
Default
no use-virtual-mac
7450 ESS Router Configuration Guide
Values 0 — 1800000
valid for route determination.
Values
0, 4 — 9000 seconds. 0 means that the router is not a default router on this link.
IP Router Configuration
Page 219